Technical Standards
Application of ICPI (Interlocking Concrete Pavement Institute) standards for joint stabilization and the use of ASTM C144 graded polymeric sands.
Coastal Durability
Utilization of breathable, "film-forming" water-based urethane sealers to resist UV degradation and prevent moisture entrapment/spalling.
Maintenance Protocol
Deep-extraction steam cleaning to remove organic growth followed by the "flood-coat" application of sand-binding stabilizers to lock interlocks.
Paver Restoration & Sealing
Structural stabilization and aesthetic preservation of luxury hardscapes and driveways.
Hardscapes in the Palm Beach climate are subject to intense hydrostatic pressure and UV radiation. Without proper joint stabilization, pavers eventually shift, creating trip hazards and allowing weeds to compromise the sub-base. Professional restoration is a mechanical process of re-aligning and locking the system.
Hardscape Service Standards
- Polymeric Sanding: This isn't just "sweeping sand." We use activated polymers that harden into a flexible grout, preventing washout during tropical downpours.
- Efflorescence Treatment: Specialized acid-wash cycles to remove the "white haze" (calcium deposits) that often migrates to the surface of pavers in humid zones.
- Sub-Surface Leveling: Identifying "low spots" caused by soil settlement or drainage failure and re-compacting the base with crushed fines before re-laying stones.
- Breathable Sealing: Using high-solid urethane sealers that allow vapor to escape from the ground while preventing salt air and pool chemicals from pitting the stone.
Frequently Asked Questions
Why are my pavers "settling" or sinking?
This is usually due to "edge restraint" failure or improper drainage. If water is allowed to sit under the pavers, it washes away the bedding sand, causing the blocks to drop.
Will sealing make my pool deck slippery?
Not if done correctly. We utilize "SharkGrip" or similar micronized polymer additives in the final sealer coat to increase the coefficient of friction for wet-zone safety.
How often should I re-seal my driveway?
In South Florida, we recommend every 2 to 3 years. The intense UV levels here break down the protective resins, leaving the stone vulnerable to tire tracking and oil stains.